|
TURNING THE PAGER ON AND
OFF
Press
<
to turn your pager on. An alert indicator on the upper left-hand corner
indicates the pager is on and ready to receive messages. When the pager is on
and no activity is taking place, the standby screen is displayed.
To turn your pager off, press
and release p
until “PAGER OFF?” is displayed. Press
<.
The time of day and date are displayed on your pager even while it is turned
off.
TURNING THE LIGHT ON AND
OFF
Press
u
at any time to turn the light on. Press
u
again while the clock or a message is displayed to turn the light off and return
to the standby screen.
SETTING THE CLOCK
Press and release
p
until “SET TIME?” is displayed. Press
<.
The hour digits begin to flash. Press and release
p
to set the correct hour digits. Press
<.
The first digit of the minutes begins to flash. Press and release
p
to set the correct minutes. Press
<
again to move to the next minutes digit. Press
<.
The A.M./P.M. indicator begins to flash. Press and release
p
to select “A” or “P”. Press u
twice or allow the pager to automatically return to the standby screen. The
time and date are displayed.
SETTING THE DATE
Press and release
p
until “SET DATE?” is displayed. Press
<.
The month digits begin to flash. Press
p
to set the correct month digits. Press
<.
The day digits begin to flash. Press
p
to set the correct day digits. Press
u
twice or allow the pager to automatically return to the standby screen. The
time and date are displayed.
SETTING THE INCOMING
MESSAGE ALERT
You can set your pager to
alert with either a pleasing (audible) alert or a vibrating (silent) alert.
Press p
until “SILENT?” or “AUDIO?” is displayed, depending on which mode the pager is
currently in. To change the alert mode, press
<
while the alert mode choice is displayed. The symbol for audible is a speaker
and the symbol for silent is a speaker with a line through it.
SETTING THE PLEASING ALERTS
You can set your pager to
alert with one of four pleasing alerts or one standard alert. Press and release p
until “SET ALERT?” is displayed. Press
<.
The current setting is displayed. Press and release
p
until your choice of ALERT 1, ALERT 2, ALERT 3, ALERT 4, or ALERT 5 is
displayed. Press u
twice or allow the pager to automatically return to the standby screen.
RECEIVING AND READING
MESSAGES
When a message is received,
the pager alerts for eight seconds. Press any button to stop the alert. Press <
to display the message. Press
u
twice while the message is displayed to return to the standby screen. Messages
containing more than 12 characters are displayed on a second screen.
u
indicates there are additional screens. The second screen is displayed
automatically after one minute, or after pressing
<.
The last screen of the message displays the message number and time the message
was received. If a message is left unread, the pager emits a reminder alert
every two minutes, and the number of unread messages is displayed on the screen
(i.e., “1 PAGE”, “2 PAGES”).
PROTECTING AND UNPROTECTING
YOUR MESSAGES
You can protect up to eight
messages so they are not erased or replaced by new messages. The message you
want to protect/unprotect must be displayed on the screen. To protect a
message, press and release p
while the message is displayed until “PROTECT?” is displayed. Press
<.
When reading a protected message, a lock symbol is displayed in the upper
portion of the screen.
To unprotect a message, press
and release p
while the message is displayed until “UNPROTECT?” is displayed. Press
<.
The lock symbol is no longer displayed.
DELETING/ERASING INDIVIDUAL
MESSAGES
Press and release
p
while the message is displayed until “DELETE?” is displayed with
".
Press <.
All remaining messages are moved to the next available message slots.
DELETING/ERASING ALL
MESSAGES
Press and release
p
until “ERASE ALL?” is displayed with a garbage can symbol. Press
<.
All read and unprotected messages are erased from pager memory.
SETTING THE ALARM
You can set your pager’s alarm
to alert you at a certain time of day. Press and release
p
until “SET ALARM?” is displayed. Press
<.
Follow the instructions under “SETTING THE CLOCK” and “SETTING THE DATE” to set
the time for the alarm to sound. To enable or disable the alarm, press and
release p
until “SET ALARM?” is displayed. Press and release
<
until you get to the ON/OFF field. Press and release
p
until your choice of “ON” or “OFF” is displayed. When the alarm is enabled, a
bell symbol is displayed on the standby screen. The bell symbol is displayed
even while the pager is off and the alarm is enabled.
BATTERY INFORMATION
This pager operates with one
AAA size alkaline battery. To remove the old battery, hold the pager (back side
facing up), and press down on the battery door. Slide the door to the side
until its locking tabs release. Continue sliding the door until it is free of
the housing. To install a new battery, align the battery so the positive (+)
and negative (-) markings match the direction of the polarity markings shown on
the back cover, and insert the battery. To replace the battery door, align the
grooves on the battery door with the grooves on the front and back housing.
Slide the battery door until it is fully closed and a “click” is heart. The
battery door is self-locking.
CLEANING YOUR PAGER
To clean smudges and grime
from the exterior of the pager, use a soft, non-abrasive cloth moistened in a
mild soap and water solution. Use a second cloth moistened in clean water to
wipe the surface clean. Do not immerse in water. Do not use alcohol or other
cleaning solutions.
To download a manual click here.
| 
