Northern Communications NUMERIC PAGERS - NP30
More than just an answering service!
 NP30 Numeric Pager
- Turn the Pager On / Off
- Insert the battery.
- Slide the switch on the side of the pager to the N position.
- Slide the switch to the · position to turn off the pager.
- The LCD will display NP-30 for 2 seconds and a to denote that the pager is on and ready to receive messages.
- The LED will flash green to indicate pager readiness.
The standby screen will display the date and the time.
Alert Mode Setting
Slide the switch to the N position to set the alert mode.
When in alert mode, you will hear a beep for 2 seconds and is displayed.
To set to Tone, push and hold the switch until SET TONE is displayed.
Release, then push the switch again until BEEP is displayed.
A sample beep alert will sound.
To set to Music, push and hold the switch until MUSIC 1 is displayed.
A sample of the music alert will sound.
Continue to push and release the switch to scroll through the 6 music alerts.
When finished setting the tone, hold button in for 2 seconds or allow time out after 8 seconds. The pager will return to standby mode.
Set Mute Mode
Slide the switch into the M position to set the mute (vibration) mode.
When in mute mode, the vibration motor will activate for 2 seconds.
No icon will display when in mute mode.
Date and Time Setting
Slide the switch into the M position. Press and hold the switch for 2 seconds. The screen will display "Slide the switch to the N position to choose '12 hour' or '24 hour' mode".
When entered into 12 or 24 hour mode, press the switch again to set the time and date. Slide the switch to the M position to choose the number which you want to change (flashing). Press the switch to enter the number. Toggle between N and M positions to go to the next number. Slide the switch to the · position to turn the pager off or wait for the 8 second timeout to return to standby mode.
Read Message
When a page is received, press and release the switch to display the message.
Messages that contain more than 12 digits continue on a second screen. This is indicated by a continuation icon in the lower right corner of the display.
The unread icon will display if the message has not yet been read.
TONE ONLY will display if when a message is received without numeric data.
The number of unread messages and time received are indicated on the display.
Up to sixteen 20 - digit messages can be stored in the pager. To read other messages, continue pressing the switch to scroll through the messages.
Delete an Individual Message
Display the message to be deleted by pressing the switch for 2 seconds. Press and hold the switch until the pager displays DEL. Release the switch.
Delete All Messages
At the standby screen, press and hold the switch until the display shows DEL ALL and release the switch. This will delete all messages except unread messages. The display will then return to the standby screen.
To download a manual click here.
To find out more please call us 800-461-3317 or 705-673-6888 and ask to speak to a customer representative. Thank you so much for your interest in NCS pager products!
* Please note: NCS only sells pagers in the Canadian marketplace.
| 
