|
|
|
|
Alphanumeric pagers provide the most functionality. You get all the benefits of a numeric pager and you can get full text messages as well!! This model is no longer in production but is available used or reconditioned.
TURNING YOUR PAGER ON To turn your pager on, press the green button. An alert indicator in the upper left-hand corner indicates that the pager is on and ready to receive messages. When the pager is on and no activity is taking place, the standby screen is displayed, showing the time and date.
TURNING YOUR PAGER OFF Press the p button until “TURN PAGER OFF?” is displayed. Press the u button. The time of day and the date are still displayed on your pager even when it is off.
SETTING THE CLOCK AND THE DATE 1. Press the p button until “SET TIME?” is displayed. 2. Press the u button. The hour digits begin to flash. 3. Press the p button repeatedly to set the correct hour digits. 4. Press the u button. The minute digits begin to flash. 5. Press the p button repeatedly to set the correct minutes. 6. Press the u button. The AM/PM field begins to flash. Repeat Steps 5 and 6 to set your pager for AM/PM, 12/24 hour, and the date. Press the green button or allow the pager to automatically return to the standby screen. The time and the date are displayed. NOTE: When adjusting any of the time and date fields, press and hold the p button to fast-forward to your selection. To skip a field, press the u button repeatedly until you get to the desired field. For example, if you only need to change the date, press the p button until “SET TIME?” is displayed. Press the u button repeatedly until the date digits begin to flash.
SETTING THE INCOMING MESSAGE ALERT You can set your pager to alert with either an audible (pleasing alert), a vibrate (vibration with no beep tone), or a chirp alert (short beep tone). Press the p button until “SET ALERT MODE?” is displayed. Press the u button. Press the p button until your choice is displayed. Press the u button or the green button. The alert mode indicator is displayed in the upper left-hand corner of the screen.
SETTING YOUR PAGER’S PLEASING ALERTS You can set your Memo Express pager to alert with one of four musical alerts or one standard beep alert. NOTE: Your pager’s incoming message alert mode must be set to AUDIBLE to choose one of the pleasing alerts. Press the p button until ‘SET ALERTS?” is displayed. Press the u button. The current setting is displayed. Press the p button until your choice of “ALERT 1”, “ALERT 2”, “ALERT 3”, “ALERT 4”, or “ALERT 5” is displayed. Press the green button to return to the standby screen.
READ MODE This feature allows you to choose the most comfortable way to view messages. Press the p button until “SET READ MODE?” is displayed. Press the u button. Press the p button repeatedly until your choice of “LINE BY LINE”, “SCROLL 1”, “SCROLL 2”, or “SCROLL 3” is displayed. In “LINE BY LINE” mode, each screen of a message is displayed for two seconds. In the “SCROLL” mode, messages automatically scroll across the screen until the entire message is displayed. “SCROLL 1” is slow speed, “SCROLL 2” is medium speed, and “SCROLL 3” is fast speed, so you can set the speed at which the message is displayed. Press the u button or the green button. NOTE: Read messages line-by-line when operating your pager at temperatures below freezing.
READING MESSAGES When a message is received, the pager alerts with an audible or a vibrate alert and a flashing message indicator (arrow pointing up). Press any button to stop the alert. Press the green button to display the message. If there are additional message screens, u is displayed. Press the green button to continue to the next screen. The time of day the message was received is displayed at the top of all message screens. In the “LINE BY LINE” mode, each message screen is automatically displayed for two seconds. To read messages in SCROLL mode: Messages automatically scroll across the screen until the entire message is displayed. Press the green button to pause the message. Press the green button again to continue to the end of the message. Press the u button to display the next message. To activate the pager’s backlight, press and hold the u button for two seconds. The pager displays the next stored message. Unread messages: When unread messages exist, the icon in the upper left hand corner of the screen flashes, and the pager vibrates or chirps (depending upon the current alert mode selected) every two minutes until all unread messages are read. To read stored messages: Your Memo Express pager can store up to 15 messages. Press the green button. Press the u button to move the cursor through the messages. The message indicator p changes to an up arrow, indicating the message slow you are currently in. Press the green button to display the message.
LOCKING AND UNLOCKING YOUR MESSAGES You can lock up to three messages so they will not be erased or replaced by new messages. The message you wish to lock/unlock must be displayed on the screen. To lock a message: Press the p button while the message is displayed until “LOCK PAGE?” is displayed. Press the u button. The message symbol p is replaced by a lock symbol. NOTE: While reading a locked message, the lock symbol is displayed in the upper portion of the screen. To unlock a message: Press the p button while the message is displayed until “UNLOCK PAGE?” is displayed. Press the u button. The lock symbol is replaced by the message symbol p.
ERASING MESSAGES To erase individual messages: Press the p button while the message is displayed until “ERASE PAGE?” is displayed. Press the u button. The message symbol p is no longer displayed. All remaining messages are moved to the next available message slots. To erase all messages: Press the p button until “ERASE PAGES?” is displayed. Press the u button. All read, unlocked messages are erased from pager memory.
SETTING YOUR PAGER’S ALARM You can set your pager’s alarm to alert you at a certain time of day. Press the p arrow until “SET ALARM?” is displayed. Press the u button. Follow the instructions under “Setting the Clock and the Date” to set the time for the alarm to sound. To enable or disable the alarm: Press the p button until “SET ALARM?” is displayed. Press the u button until you get to the ON/OFF field. Press the p button until your choice of “ON” or “OFF is displayed. When the alarm is enabled, a bell symbol is displayed on the standby screen. NOTE: The alarm symbol is displayed even when the pager is off and the alarm is enabled.
SETTING AUTOMATIC ON AND OFF You can set your Memo Express pager to automatically turn on and off. This feature can greatly improve battery life. To enable automatic mode: Press the p button until “PAGER AUTO?” is displayed. Press the u button. The current setting is displayed and a box appears around the alert mode indicator. To set the on/off times: Press the p button until “SET AUTO ON/OFF?” is displayed. Press u. The current setting is displayed and the auto-on hour digits flash. Follow the instructions under “Setting the Clock and the Date” to set the turn-on and turn-off times. The left series of digits are the turn-on time. The right series of digits are the turn-off time. NOTES: When operating in the automatic on/off mode, the pager can still be manually turned on and off. To disable automatic mode: Press the p button until “PAGER MANUAL?” is displayed. Press the u button. The square box disappears from the standby screen.
STANDARD FEATURES Time of Day/Day and Month: The time of day and the date and month are displayed whether the pager is on or off. User-Selectable Pleasing Alerts: When the pager is in the audible alert mode and a message is received, the pager alerts with a pleasing musical sound. Message Lock: Up to three messages can be locked so they will not be removed from memory. Automatic Reset: Pager alerts automatically stop even if you do not press any of the pager’s buttons. Reminder Chirp: The pager chirps or vibrates every two minutes until you read all unread messages. Low-Battery Indicator: When the battery is nearing the end of its life, the low-battery symbol is displayed and the pager gives a two-second alert. Replace the battery within five days after first appearance of the low-battery indicator. Endless Line Display (Scroll): Messages automatically scroll across the screen until the entire message is displayed. Backlight: In low-light conditions, press and hold the u button for two seconds while reading a message to activate the pager’s backlight. The backlight is also activated by pressing the u button while in the standby mode. Time Stamp: The time of day that a message was received is displayed on all screens of the message. Automatic On/Off: The pager can be set to turn on and turn off at preselected times. Message Erase: When messages are no longer needed, erase them to free space for new messages. Memory Retention: All messages remain in memory even when the pager is turned off or when changing the battery.
BATTERY INFORMATION The Memo Express pager operates with one AAA-size alkaline battery. To install the battery: Hold the pager in both hands and use your thumbs to press down on the battery door. Slide the door until its locking tabs release. Continue sliding the door until it is free of the housing. Align the battery so the positive (+) and negative (-) markings match the direction of the polarity markings. Insert the battery. To replace the battery door, align the grooves on the battery door with the grooves on the front and back housing. Slide the battery door until it is fully closed and a “click” is heard. The battery door is self-locking.
CLEANING YOUR MEMO EXPRESS PAGER To clean smudges and grime from the exterior of the Memo Express pager, use a soft, non-abrasive cloth moistened in a mild soap and water solution. Use a second cloth moistened in clean water to wipe the surface clean. Do not immerse in water. Do not use alcohol or other cleaning solutions. |
Send mail to
info@northerncom.com with questions
or comments about this web site.
|
