FUNCTION BUTTON

This button is located on the left hand side of the pager and is oval in appearance. Its main purpose is to bring up a menu of the variety of functions the pager is able to do.

READ BUTTON

This button is located below the display, to the right side of the pager and is triangular in appearance. Its main purpose is to display incoming pages.

TURNING PAGER ON

Press the function button to turn the pager on. The pager will go through a start up sequence and will vibrate and beep for a few seconds. You can stop the beeping by pressing the read button.

TURNING PAGER OFF

Press the function button twice, until you see either “TONE ON?” or “TONE OFF?” on the display. Press the read button until you see “POWER OFF” on the display. Press the function button to turn the pager off. The screen will go blank.

SWITCHING TO SILENT MODE

Silent mode, or vibrate mode, is activated by pushing the function button until you see “TONE OFF?” on the screen. Press the function button one more time to activate this mode. A quiet “beep” will confirm this has been activated. All pages coming in when this is activated will be silent, and the pager will only vibrate to alert you. The display will show a small face with an “X” across the mouth.

SWITCHING TO AUDIBLE MODE

Audible mode, or beep mode, is activated by pushing the function button until you see “TONE ON?” on the screen. Press the function button one more time to activate this mode. A quiet “beep” will confirm this has been activated. All pages coming in when this is activated will be announced by an audible beeping/tune. The display will show either a speaker (for beeping) or a musical note (for a melody).

MELODY SET

When in the “audible/beep mode”, the pager has a choice of three different sounds. To switch between these three sounds, press the function key until you see “TONE ON?” on the screen. Press the read button three times until you see “MELODY SET” on the screen. Press the function button and the selected melody will be played. Press the read button to scroll through the three different tunes. When you have selected the tune you wish to activate, press the function button to activate it.

SETTING THE TIME AND DATE

Press the function button twice, until you see either “TONE ON?” or “TONE OFF?” on the display. Press the read button until you see “SET TIME” on the display. Press the function button, and the “month” digit will flash. Press the read button to scroll through the months. When you have reached the correct month, press the function button to move to the “day” digit. Press the read button to scroll through the days. Repeat this procedure, setting the hour, minutes, and AM/PM feature. When all are set, press the function button. A quiet “beep” will confirm that the date and time are activated.

SETTING THE ALARM

Press the function button twice, until you see either “TONE ON?” or “TONE OFF?” on the display. Press the read button until you see “SET ALARM” on the screen. Press the function button, and the “hour” digit will flash. Set alarm time using same procedures as you did when you set the clock. When all are set, and the display shows “ON”, press the function button. A quiet “beep” will confirm that the alarm is activated, and a small picture of a bell will show up at the top middle of the display to show the alarm is set.

READING AN INCOMING PAGE

This pager has 16 message slots and each message slot stores up to 20 digits. When a message is received, the pager vibrates for six seconds (when in the silent mode) or beeps for 15 seconds (when in the audible mode). You can press any button to stop the beeping or vibrating. Press the read button to read the incoming message. Pressing the read button a second time will show you which message slot is being used, and the time the message was received. If you do not read an incoming message, the pager will alert you every 30 seconds of the unread message.;

MESSAGE LOCK

You can lock a message to prevent it from accidentally being erased. While the message is on the screen, press the function button twice. A quiet “beep” and a small “lock” symbol on the screen will confirm that the message has been locked. It can not be deleted until it has been unlocked. To unlock it, follow the same procedures as locking it. The symbol will disappear, and the message can be deleted now.

ERASE ONE MESSAGE

You can individually erase a message. While the message is on the screen, press the read button one more time. The display shows “ERASE?”. Press the function button to erase the page. If you do not want to erase it, just press the read button again and the message will stay in the pager.

ERASE ALL MESSAGES

You can erase all unlocked messages at one time. Press the function button twice, until you see either “TONE ON?” or “TONE OFF?” on the display. Continue to hold in the function button until you see “ERASE ALL” on the display. Press the function button one more time to delete all unlocked messages.

POWER AUTO ON/OFF

You can program your pager to come on at 5:00AM, and turn off at 1:00AM. To do this, press the function button twice, until you see either “TONE ON?” or “TONE OFF?” on the display. Continue to hold in the function button until you see “ERASE ALL” on the display. Press the read button, and the display shows “SET AUTO”. Press the function button, and the display will show “AUTO ON” or “AUTO OFF”. Press the read button to select “OFF” or “ON” and press the function button to activate your selection.

STOPWATCH

The pager has a built-in stopwatch. Press the function button twice, until you see either “TONE ON?” or “TONE OFF?” on the display. Continue to hold in the function button until you see “ERASE ALL” on the display. Press the read button until you see “STOP WATCH” on the display. Press the function button and it will go into standby mode. To start the counting, press the function button once more. To stop the counting, press the read button. To clear the counting back to zero, press the function button once. To exit the stop watch program, press and hold the function button for three seconds. The display will go back to the current date and time.

OUT OF RANGE (SVC) DISPLAY

While the pager is in the coverage area, a symbol showing “SVC” will display on the pager. If the pager leaves the coverage area, this symbol will disappear, and the pager is no longer able to receive a message. The display will reappear when the pager is brought back into the coverage area.

BATTERY INFORMATION

This pager is designed to operate on one AAA alkaline battery. To install the battery, slide the locking tab to the unlocked position. Remove the battery cover from the pager. Remove the old battery and install a new battery by aligning the positive and negative ends of the battery with the picture of the battery inside the battery compartment. The negative end of the battery should be resting against the spring. Replace the battery cover and slide the locking tab to the locked position. When the pager’s battery needs to be changed, a display showing “LO BATT” will show on the screen.